Intel ECB-862 ECB-862/862L, 4.5.5.15Use IR Pin, 4.5.5.14UR2 Duplex Mode, 4.5.5.18EPP Mode Select, 4.5.5.19ECP Mode Use DMA, 4.5.5.17Parallel Port Mode

ECB-862/862L

4.5.5.13IR Transmission Delay

If this option is enabled, transmission of data will be slower. This is recommended when you encounter transmission problem with your device.

The choice: Disable, Enable.

4.5.5.14UR2 Duplex Mode

Select to activate the Infrared transfer function. This default setting is “Half“.

The choice: Full, Half.

4.5.5.15Use IR Pin

When you select to IrDA or ASKIR mode, you can define use (TX,RX ) pin.

The choice: RxD2, TxD2; IR-Rx2Tx2.

4.5.5.16Onboard Parallel Port

Select address and interrupt for the Parallel port.

The choice: Disable, 378/IRQ7, 278/IRQ5, and 3CB/IRQ7.

4.5.5.17Parallel Port Mode

Select an operating mode for the parallel port.

The choice: SPP, EPP, ECP, ECP+EPP, and Normal.

4.5.5.18EPP Mode Select

Set parallel port as EPP1.7 or EPP1.9.

The choice: EPP1.7, EPP1.9.

4.5.5.19ECP Mode Use DMA

Select a DMA channel if parallel port is set as ECP or ECP+EPP.

The choice: 1, 3.

ECB-862/862L User’s Manual 57