User’s Manual

4.5.6.7Suspend Type

System further shuts down all devices and all right select stop Grant or Power on suspend function.

The choice: stop Grant , PowOn Suspend.

4.5.6.8MODEM Use IRQ

This item tells the Power Management BIOS which IRQ is assigned to the installed

MODEM.

The choice: NA, 3, 4, 5, 7, 9, 10 and 11.

4.5.6.9Suspend Mode

System further shuts down all devices except for CPU itself. This is the third level of Power Management.

4.5.6.10HDD Power Down

This instructs hard drives to shut off while in the Power Management modes.

4.5.6.11Soft-Off by PWR-BTTN

When set to “Delay 4 Sec.”, the power button has a dual function where pressing less than 4 seconds will place the system in sleep mode and shut down the system when the button is held more than 4 seconds. “Instant-Off”, the system will be shut down right away when the power button is pressed.

The choice: Instant-Off, Delay 4 Sec.

4.5.6.12CPU Thermal-Throttling

Set the percent of power consumption when CPU over heat.

The choice: 87.5﹪, 75.0﹪, 62.5﹪, 50.0﹪, 37.5﹪, 25.0﹪, 12.5﹪.

4.5.6.13Wake-Up by PCI card

If your PCI card supports PME (Power Management Event) signal and this item is set as Enabled, PCI peripherals drive PME signal to wake the system from low-power states S1- S5.

The choice: Disable, Enable.

4.5.6.14Power On by Ring

The option lets you specify enable or disable external Modem Wake Up function. It powers up the computer when the modem receives a call while the computer is in Soft-off mode.

The choice: Disable, Enable.

60ECB-862/862L User’s Manual