28 ISP2150 2U Rack Server Platform Product Guide
Locking and Unlocking the Front Bezel
The bezel can be locked and unlocked to prevent unwanted access to the system.
To lock the bezel:
1. Remove the keys from inside the bezel (they should be taped to the inside).
2. Close the bezel and insert the key into the lock. Turn the counterclockwise until it stops (about
a quarter turn). The bezel is now locked and cannot be opened.
To unlock the bezel, insert the key into the lock and turn the lock clockwise until it stops (about a
quarter turn). The bezel is now unlocked and can be opened again.
Attaching and Removing the Front Bezel
The front bezel can be installed or removed from the system.
To attach the bezel:
1. With the LED light tunnels located at the top of the bezel, push in the arms on either side of the
bezel far enough so that the tabs on the ends of the arms can be inserted into the holes in the
chassis.
2. Insert the tabs into the holes in the handles on the chassis. Make sure the tabs on each side of
the bezel are completely in the holes in the handles.
To remove the bezel:
1. Push the arms far enough in so that the tabs on the end of the arms are completely out of the
holes in the handles on the chassis. The bezel should now be able to be removed.
2. The bezel should now be able to open and close easily and completely.