64 ISP2150 2U Rack Server Platform Product Guide
Console Redirection Submenu
Feature Choices Description
COM Port Address Disabled
3F8
2F8
3E8
When enabled, console redirection uses the I/O port specified.
3F8 - typically is COM1
2F8 - typically is COM2
All keyboard/mouse and video will be directed to this port. This
is designed to be used only under DOS in text mode.
IRQ # N/A This field is informational only.
Baud Rate 9600
19.2k
38.4k
115.2k
When console redirection is enabled, specifies the baud rate to
be used.
Flow Control No Flow Control
CTS/RTS
XON/XOFF
CTS/RTS + CD
None disallows flow control.
CTS/RTS is hardware-flow control.
XON/XOFF is software-flow control.
CTS/RTS +CD is hardware plus carrier-detect flow control.
Note: Bold type indicates the default choice.
PEP Management Submenu

Verify in BIOS Setup of your server board whether or not your system BIOS includes PEP. If not,

when it becomes available, you can download it from the Intel Customer Support web site:

http://support.intel.com/support/motherboards/server/LB440gx

Feature Choices Description
PEP Filter Events Enters submenu.
PEP Enable Disable
Enable Enables Platform Event Paging.
PEP Blackout
Period [0…9] Sets the amount of time between pages in minutes. Valid
range is from 0 to 255. A value of 0 indicates no blackout
period.
PEP Page String Sets the string used to page you. Generally this is the
attention command for your modem, followed by the number of
your paging service, followed by the message you want to
appear on your pager, followed by a modem hang-up
command. Use commas for 1second pauses. This field is
only 16 characters long. The 17-32, 33-48, and 49-64 fields
are a continuation of the PEP Page String Field so you can
enter in another 48 characters for 64 characters total.
17-32 This is a continuation of the PEP Page String Field. When
16 characters are typed into the Modem Init String field, this
field will appear to allow another 16 characters to be typed in.
33-48 This is a continuation of the PEP Page String Field. When
16 characters are typed into the Block #2 field, this field will
appear to allow another 16 characters to be typed in.
49-64 This is a continuation of the PEP Page String Field. When
16 characters are typed into the Block #3 field, this field will
appear to allow another 16 characters to be typed in.
Send Test Page Press Enter
Send Test Page Now To send a test page, select "Send Test Page Now" from the
popup menu.
Note: Bold type indicates the default choice.