86 ISP2150 2U Rack Server Platform Product Guide
Connect
When [Re]Connect is selected from the Connect menu, the Connect dialog in Figure 38 is
displayed. This dialog allows you to connect to a server. If the client machine is already connected
to a server, initiating connection generates a warning message. The message indicates that the
existing connection will be terminated if you continue trying to initiate the new connection. You
are prompted to enter the EMP password whenever a connection is attempted.
Figure 38. Connect Dialog
Options available in the dialog are:
• Line Selection - you can specify whether to use a direct connection or dial-up modem
connection to the server.
Dial-up - connects to a selected server with a modem.
Direct connect (Serial Line) - connects to the selected server directly using a null modem
serial cable.
• Server - a server name can be selected from the dropdown list of available servers. A server
must be selected when the line selection is Dial-up.
• Serial Line - These options are enabled when the line selection is set to Direct connect
(Serial Line).
Baud Rate - must be 19200 for EMP to connect properly.
COM Port No. - set the COM Port number to the port which the null modem serial cable is
connected to.
• Connect - initiates the connection to the connected server. When this button is clicked, you are
prompted for the EMP password.
• Config - displays the Phonebook dialog.
• Cancel - exits the Connect dialog without taking any action.
• Help - displays the help information for this dialog.