9
1 Description

Server Board Features

Table 1. Server Board Features

Feature Description
Processor Installed: Up to two Intel® Pentium® II or Pentium III processors operating at 1.8
V to 3.5 V. The server board’s voltage regulator is automatically programmed by
the processor’s VID pins to provide the required voltage.
Memory (DRAM) Four 72 bit sockets for 168-pin, gold contact, 100 MHz, PC/100 compliant, ECC
or non-ECC, registered or unbuffered, SDRAM dual inline memory
modules (DIMM).
Video Memory Installed: 2 MB of video memory.
PCI bus Two standard PCI (PCI-33/32 bit) expansion slots on a riser card for add-in
boards. Embedded devices: video controller, Network Interface Controller
(NIC), and SCSI controller.
Server Management Thermal/voltage monitoring and error handling.
Real time clock/calendar (RTC).
Front panel controls and indicators (LEDs).
System Setup Utility (SSU).
Basic Input/Output System (BIOS), Power On Self Test (POST), and Setup
stored in flash memory.
Graphics Integrated onboard Cirrus Logic† CL-GD5480 super video graphics array
(SVGA) controller.
SCSI Adaptec† AIC-7896, supporting onboard Ultra2 (LVDS) Wide and Ultra-wide
SCSI interfaces.
Network Integrated onboard NIC, an Intel® 82559 single chip PCI LAN controller for 10 or
100 Mbps TX Fast Ethernet networks. RJ-45 Ethernet connector and indicator
LEDs at I/O back panel.
System I/O PS/2-compatible keyboard and mouse ports, 6 pin DIN.
Advanced parallel port, supporting Enhanced Parallel Port (EPP) level 1.7 and
1.9, ECP, compatible 25 pin.
VGA video port, 15 pin.
Two serial ports, 9 pin.
RJ-45 Ethernet port.
Two USB ports.