62 ISP2150 2U Rack Server Platform Product Guide
Server Menu

You can make the following selections on the Server Menu itself.

Feature Choices Description
System
Management Enters submenu.
Console Redirection Enters submenu.
PEP Management Enters submenu.
Enable Sleep Button Disabled
Enabled Enables optional ACPI support for the sleep button.
PCI IRQs to IO-
APIC mappings Disabled
Enabled Enabled - BIOS can describe all 24 IO APIC pins in the
MP table for PCI interrupts. Not all MP operating
systems and drivers can understand this description of
the interrupts in the MP table.
Disabled - BIOS will only use 16 IO APIC pins in the
MP table for PCI interrupts. All PCI interrupts are routed
to a standard ISA IRQ pins on IO APIC. All operating
systems will work with standard ISA IRQ entries.
Processor Retest Yes
No Yes tells BIOS to clear the historical processor status
and retest all processors on the next boot. BIOS
automatically resets to No in next boot.
Assert NMI on
SERR Disabled
Enabled Enabled generates an NMI on SERR.
Note: Bold type indicates the default choice.

System Management Submenu

Feature Choices Description
Server Management
Info Enters submenu.
System Event
Logging Disabled
Enabled When enabled, system events will be logged by BIOS and
BMC in system event log.
Clear Event Log No
Yes Yes clears the system event log (SEL) in BMC. BI OS
automatically resets to NO for next boot.
EMP Password
switch Disabled
Enabled
Sets the EMP password.
EMP Password [A..Z, 0..9] This field only shows up when the EMP password switch
is enabled. Entering a password and pressing return will
send the password immediately to the BMC. If a beep is
heard the password was not accepted. If no password is
entered, anyone has access to the server through the
EMP Console.
EMP Escape
sequence +++ Sets the escape sequence for the modem being used for
EMP. This will force the modem to command mode. This
is only used if the EMP direct connect/modem mode is set
to modem.
continued