Configuration Software and Utilities 63

System Management Submenu (continued)

Feature Choices Description
EMP Hang-up Line
String ATH Sets the Hang-up Line Sequence for the modem being
used for EMP. Used in EMP modem mode.
Modem Init String AT&F0S0=1S14=0&D Sets the initialization string for the modem being used for
EMP. Used in EMP modem mode.
This field is only 16 characters long. The High Modem Init
String field is a continuation of the Modem Init string so
you can enter in another 4 characters.
High Modem Init
String 0This is a continuation of the Modem Init String. When
16 characters are typed into the Modem Init String field,
this field will appear to allow another 4 characters to be
typed in.
EMP Access Mode Pre-boot Only
Always Active
Disabled
Pre-boot Only - EMP is only enabled during power down
through end of POST. COM2 is returned to syst em use at
the end of Post when operating system boots.
Always Active - EMP is always enabled. COM2 cannot be
used by operating system. It is now dedicated for EMP
use.
Disabled - EMP is disabled. COM2 is always available for
system use by console redirection or op erating system.
EMP Restricted
Mode Access Disabled
Enabled If set to Enabled, Power on/off and Reset server controls
via EMP are no longer available.
EMP Direct
Connect/Modem
Mode
Direct Connect
Modem Mode
Sets how EMP connects to the server. Direct Connect
means a null modem serial cable directly connects COM2
connector port to the EMP console machine.
Modem mode indicates that a modem is connected on
COM2 for EMP use.
Note: Bold type indicates the default choice.
Server Management Information Submenu

Items on this menu are set when the server board is manufactured and cannot normally be changed.

The last two items refer to the firmware level of the BMC on the server board and HSC (Hot Swap

Controller) from the Astor II server chassis. If circumstances require a change in the LB440GX

server board’s firmware, specific direction will be provided by Intel Customer Support.

Feature Choices Description
Board Part Number N/A Information field only
Board Serial Number N/A Information field only
System Part Number N/A Information field only
System Serial Number N/A Information field only
Chassis Part Number N/A Information field only
Chassis Serial Number N/A Information field only
BMC Revision N/A Information field only
Primary HSBP Revision N/A Information field only
Note: Bold type indicates the default choice.