Configuration Software and Utilities 57
Keyboard Submenu
Feature Choices Description
Num Lock On
Off Selects the power on state for Num Lock.
Key Click Disabled
Enabled Enables or disables the audible key click.
Keyboard auto-repeat rate 30/sec
26.7/sec
21.8/sec
18.5/sec
13.3/sec
10/sec
6/sec
2/sec
Sets the numbers of time per second a key will repeat while
it is held down.
Keyboard auto-repeat delay 1/4 sec
1/2 sec
3/4 sec
1 sec
Sets the delay before a key starts to repeat when it is held
down.
Note: Bold type indicates the default choice.
Processor Settings Submenu
Feature Choices Description
CPU Speed Setting 350 MHz
400 MHz
450 MHz
500 MHz
550 MHz
600 MHz
650 MHz
667 MHz
700 MHz
Sets the speed for the installed processor(s). This feature is
not active (that is, it is grayed out) if the CPU speed setting
is locked.
CAUTION
Attempting to set this higher than the proper speed
for the installed processor(s) may cause damage to
the processor(s) or prevent the server from booting
until a CMOS clear is preformed.
CPU POST Speed Settings N/A This field is informational only.
Processor Retest Yes
No Yes tells BIOS to clear the historical processor status and
retest all processors on the next boot. BIOS automatically
resets to No in next boot.
Processor serial number Enabled
Disabled Controls the detection of the processor’s serial number.
Memory Cache Enabled
Disabled Enables processor cache.
Processor 1 Stepping ID N/A This field is informational only.
Processor 1 L2 Cache Size N/A This field is informational only.
Processor 2 Stepping ID N/A This field is informational only.
Processor 2 L2 Cache Size N/A This field is informational only.
Note: Bold type indicates the default choice.