Environmental Requirements
R
28 mPGA604 Socket
Mechanical Design Guide
5.1 Mixed Flowing Gas Test will be defined in a future revision of this document.
5.2 Solvent Resistance Requirement: No damage to ink markings if applicable. EIA 364-11A
5.3 Durability Use per EIA-364, test procedure 09. Measure contact resistance when mated in 1st and 30th cycles.
The package should be removed at the end of each de-actuation cycle and reinserted into the socket.
The socket’s pick-and-place cover must be able to be inserted and removed from the socket at least
30 times.