Intel MPRTM0020 13 RJ-45 Gigabit Ethernet Port LEDs, Board Status LED Descriptions, Function

Module Components

Table 14.	Board Status LED Descriptions
		LED	Function
	Hot Swap		Function: Hot Swap as defined in AdvancedTCA 3.0 Specification
			It is also possible for a user to override the default behavior of the LED using
			AdvancedTCA FRU LED Control commands.
			Possible States: OFF / BLUE / SHORT BLINK / LONG BLINK
			Blinking Blue: Preparing for removal/insertion. Long blink indicates activation is in
			progress, short blink when deactivation is in progress
	Out of Service		Function: Out of Service (AdvancedTCA LED 1).
			RED: The board is out of service.
			OFF: The board is running.
			It is possible for a user to override the default IPMC behavior of the LED using
			AdvancedTCA FRU LED Control commands.
			Possible States: OFF / RED / AMBER
			Function: Health (AdvancedTCA LED 2). The SBC health is based on an aggregation of
	Health		IPMI sensors, like board temperature and voltage.
			Green: The SBC is healthy.
			Red: The SBC is not healthy.
			It is possible for the user to override the default IPMC behavior of the LED using
			AdvancedTCA FRU LED Control commands.
			Possible States: OFF / GREEN / RED / AMBER

4.3.13RJ-45 Gigabit Ethernet Port LEDs

The RJ-45 connector for each of the Gigabit Ethernet ports on the RTM has two indicator LEDs integrated in the connector body.

As shown in Figure 15, the top LED represents the LINK LED while the bottom LED represents the SPEED LED.

Figure 15. RJ-45 Ethernet Port LEDs

28 Intel NetStructure® MPRTM0020 Technical Product Specification – April 2006