Safety Warnings |
|
Safety Warnings | 11 |
11.1Safety Precautions
Review the following precautions to avoid personal injury and prevent damage to this product or products to which it is connected. To avoid potential hazards, use the product only as specified.
Read all safety information and understand the precautions associated with safety symbols, written warnings, and cautions before accessing parts or locations within the unit.
System for Restricted Access Use Only!
Warning: To avoid the risk of electrical shock hazard, special measures and precautions must be taken when using these products:
—Access to this equipment must be restricted by locating this equipment where access can only be gained by SERVICE PERSONNEL who have been informed about the reasons for the restrictions applied to the location and about any precautions that shall be taken. Access is through the use of a TOOL, lock and key, or other means of security and is controlled by the authority responsible for the location.
—This product should only be used by SERVICE PERSONNEL who have the knowledge and training required to work with products of this type.
—To avoid shock, ensure that the chassis power cables are connected to a properly wired and grounded receptacle.
—The system containing these boards should not be operated with the faceplates, blank panels, or covers removed. Some voltages, that are on the board and inside the chassis, present an electrical shock and/or energy hazard to the user. Keep hands out of the chassis when power is applied or when performing hot swap of the boards.
44 | Intel NetStructure® MPRTM0020 Technical Product Specification – April 2006 |
