Problems following Initial System Installation

Problems that occur at initial system startup are usually caused by an incorrect installation or configuration. Hardware failure is a less frequent cause. If the problem you are experiencing is with a specific software application, see “Problems with Newly Installed Application Software”.

First Steps Checklist

Is AC power available at the wall outlet?

Are the power supplies plugged in? Check the AC cable(s) on the back of the chassis and at the AC source.

Are all cables correctly connected and secured?

Are the processors fully seated in their sockets on the server board?

Are all standoffs in the proper location and not touching any components, causing a potential short?

Are all add-in PCI boards fully seated in their slots on the server board?

Are all jumper settings on the server board correct?

Are all jumper and switch settings on add-in boards and peripheral devices correct? To check these settings, refer to the manufacturer's documentation that comes with them. If applicable, ensure that there are no conflicts-for example, two add-in boards sharing the same interrupt.

Are all peripheral devices installed correctly?

If the system has a hard disk drive, is it properly formatted or configured?

Are all device drivers properly installed?

Are the configuration settings made in Setup correct?

Is the operating system properly loaded? See the operating system documentation.

Did you press the system power on/off switch on the front panel to turn the server on (power on light should be lit)?

Is the system power cord properly connected to the system and plugged into a NEMA 5 15R outlet for 100-120V or a NEMA 6-15R outlet for 200-240V ?

Are all integrated components from the tested components lists? Check the tested memory, and chassis lists, as well as the supported hardware and operating system list. See “Server System References” for links to the tested component lists.

90

Intel® Server System SR1550AL/SR1550ALSAS User’s Guide

Page 110
Image 110
Intel SR1550ALSAS manual Problems following Initial System Installation, First Steps Checklist

SR1550AL, SR1550ALSAS specifications

The Intel SR1550ALSAS and SR1550AL servers are designed to provide reliable and high-performing solutions for various enterprise applications. Built on Intel's robust architecture, these server systems cater to businesses seeking efficient data management, scalable infrastructure, and effective virtualization support.

One of the main features of the SR1550 series is its dual-socket capability, accommodating Intel Xeon processors, which deliver exceptional multi-threaded performance. This allows organizations to enhance processing power to handle demanding workloads effectively, such as databases, transactional applications, and virtualization tasks. The server can support a significant amount of RAM, typically up to 512 GB of DDR3 memory, ensuring ample resources for modern applications requiring substantial memory bandwidth.

The SR1550 model comes equipped with various storage options to support large data sets. With support for multiple SATA and SAS drives, users can configure the server to meet their performance needs, whether it is for fast access speeds or high-capacity storage requirements. Hot-swap drive bays improve maintenance efficiency, allowing administrators to replace drives without downtime.

In terms of connectivity, the SR1550 servers feature multiple Ethernet ports and expansion slots, providing flexibility for network configurations and the integration of additional components. The server supports PCIe slots for adding GPUs, RAID controllers, or additional network interfaces, enhancing versatility and performance for various use cases.

The SR1550 series also incorporates advanced management features to simplify administration. The Intel Integrated Lights Out Manager (ILOM) allows remote monitoring and management, which is crucial for maintaining uptime and performing troubleshooting without physical access to the hardware.

Another significant characteristic is the design's attention to energy efficiency. Intel's architecture optimizes power consumption, and advanced cooling techniques ensure that the system operates under thermal thresholds, thus maximizing performance while managing energy usage effectively.

In summary, the Intel SR1550ALSAS and SR1550AL servers combine a powerful processor architecture, scalability, extensive storage options, comprehensive management features, and energy efficiency. These characteristics make them suitable for diverse applications, ensuring that businesses can meet their performance and reliability needs in an ever-evolving IT landscape.