Intel® Server System SR1550AL/SR1550ALSAS User’s Guide 75
Installing the Fan Pack
1. Lower the fan pack into place as shown in the figure below (see letter “A”) and
slide it to the right (see letter “B”).
2. Connect the fan cables to the mid-plane board as shown in the figure below (see
letter “C”).
Figure 68. Installing the Fan Pack
3. Install the bridge board.
4. Connect the IDE cable to the backplane.
5. Install the power distribution board cover. For instructions, see “Replacing the
Power Distribution Module”.
6. Install the processor air duct. For instructions, see “Installing the Processor Air
Duct”.
7. Install the server system cover. For instructions, see “Installing the Server System
Cover”.
8. Plug all peripheral devices and the AC power cable into the server.
B
AF001498
CA