22.Fully extend the left and right rails until the extension locks have engaged and the rails will not push back in. The rail system is now ready to receive the chassis.

Caution: Lifting and placing the chassis in the rails is a two-person job. If needed, use an appropriate lifting device.

23.With the chassis front facing you, lift the chassis and carefully insert the rails attached to the chassis in the extended rails.

24.Slide the chassis toward the rear of the cabinet until the rails lock together.

25.Depress and hold down the finger tabs on both extension locks while sliding the chassis toward the rear.

26.Slide the chassis all the way into the rack until the chassis handles are against the front posts.

Basic Rail Rack Mount Removal

1. Disconnect all cables from the back of the system.

Note: Remember to use the system LED to properly identify the system you are servicing.

2.Pull system from rack until brackets are fully extended.

3.Push in both clips on the brackets and slide the system forward until the inner rail separates from the outer rail.

4.Remove and service the system.

Basic Rail Rack Mount Installation

1.Extend the inner rail until it locks.

2.Depress the spring safety lock to release the inner rail.

3.Remove the inner rail from the rail assembly.

4.Attach the outer rail slides to the rack posts using two #10-32 x 1/2 screws at the front posts, and two #10-32 x 1/2 screws at the rear posts.

Note: The rail flanges mount to the inside of each post.

5.Insert the inner rails over the server chassis sidewall studs.

6.Slide the inner rails toward the front of the server chassis.

7.Secure the inner rails with one #6-32 x 1/4 screw for each rail.

8.Align the inner rails (attached to the server chassis) with the outer rail assemblies (attached to the rack).

9.Engage the matching rails and slide the server chassis into the rack until the two safety stops lock into position.

10.Depress the two safety locks (one on each side).

Intel® Server System SR1550AL/SR1550ALSAS User’s Guide

23

Page 42 Page 44
Page 43
Image 43
Intel SR1550ALSAS manual Basic Rail Rack Mount Removal, Basic Rail Rack Mount Installation
Page 42 Page 44

SR1550AL, SR1550ALSAS specifications

The Intel SR1550ALSAS and SR1550AL servers are designed to provide reliable and high-performing solutions for various enterprise applications. Built on Intel's robust architecture, these server systems cater to businesses seeking efficient data management, scalable infrastructure, and effective virtualization support.

One of the main features of the SR1550 series is its dual-socket capability, accommodating Intel Xeon processors, which deliver exceptional multi-threaded performance. This allows organizations to enhance processing power to handle demanding workloads effectively, such as databases, transactional applications, and virtualization tasks. The server can support a significant amount of RAM, typically up to 512 GB of DDR3 memory, ensuring ample resources for modern applications requiring substantial memory bandwidth.

The SR1550 model comes equipped with various storage options to support large data sets. With support for multiple SATA and SAS drives, users can configure the server to meet their performance needs, whether it is for fast access speeds or high-capacity storage requirements. Hot-swap drive bays improve maintenance efficiency, allowing administrators to replace drives without downtime.

In terms of connectivity, the SR1550 servers feature multiple Ethernet ports and expansion slots, providing flexibility for network configurations and the integration of additional components. The server supports PCIe slots for adding GPUs, RAID controllers, or additional network interfaces, enhancing versatility and performance for various use cases.

The SR1550 series also incorporates advanced management features to simplify administration. The Intel Integrated Lights Out Manager (ILOM) allows remote monitoring and management, which is crucial for maintaining uptime and performing troubleshooting without physical access to the hardware.

Another significant characteristic is the design's attention to energy efficiency. Intel's architecture optimizes power consumption, and advanced cooling techniques ensure that the system operates under thermal thresholds, thus maximizing performance while managing energy usage effectively.

In summary, the Intel SR1550ALSAS and SR1550AL servers combine a powerful processor architecture, scalability, extensive storage options, comprehensive management features, and energy efficiency. These characteristics make them suitable for diverse applications, ensuring that businesses can meet their performance and reliability needs in an ever-evolving IT landscape.
Top Page Image Contents