Warnings

Heed safety instructions: Before working with your server product, whether you are using this guide or any other resource as a reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this guide. Use of other products / components will void the UL listing and other regulatory approvals of the product and will most likely result in noncompliance with product regulations in the region(s) in which the product is sold.

System power on/off: The power button DOES NOT turn off the system AC power. To remove power from system, you must unplug the AC power cord from the wall outlet. Make sure the AC power cord is unplugged before you open the chassis, add, or remove any components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be present on power, telephone, and communication cables. Turn off the server and disconnect the power cord, telecommunications systems, networks, and modems attached to the server before opening it. Otherwise, personal injury or equipment damage can result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives, boards, and other parts. We recommend that you perform all procedures in this chapter only at an ESD workstation. If one is not available, provide some ESD protection by wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on your server when handling parts.

ESD and handling boards: Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by their edges. After removing a board from its protective wrapper or from the server, place the board component side up on a grounded, static free surface. Use a conductive foam pad if available but not the board wrapper. Do not slide board over any surface.

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips over two jumper pins. Some jumpers have a small tab on top that you can grip with your fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab, take care when using needle nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can damage the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board.

Intel® Server System SR1550AL/SR1550ALSAS User’s Guide

ix

Page 8 Page 10
Page 9
Image 9
Intel manual Intel Server System SR1550AL/SR1550ALSAS User’s Guide
Page 8 Page 10

SR1550AL, SR1550ALSAS specifications

The Intel SR1550ALSAS and SR1550AL servers are designed to provide reliable and high-performing solutions for various enterprise applications. Built on Intel's robust architecture, these server systems cater to businesses seeking efficient data management, scalable infrastructure, and effective virtualization support.

One of the main features of the SR1550 series is its dual-socket capability, accommodating Intel Xeon processors, which deliver exceptional multi-threaded performance. This allows organizations to enhance processing power to handle demanding workloads effectively, such as databases, transactional applications, and virtualization tasks. The server can support a significant amount of RAM, typically up to 512 GB of DDR3 memory, ensuring ample resources for modern applications requiring substantial memory bandwidth.

The SR1550 model comes equipped with various storage options to support large data sets. With support for multiple SATA and SAS drives, users can configure the server to meet their performance needs, whether it is for fast access speeds or high-capacity storage requirements. Hot-swap drive bays improve maintenance efficiency, allowing administrators to replace drives without downtime.

In terms of connectivity, the SR1550 servers feature multiple Ethernet ports and expansion slots, providing flexibility for network configurations and the integration of additional components. The server supports PCIe slots for adding GPUs, RAID controllers, or additional network interfaces, enhancing versatility and performance for various use cases.

The SR1550 series also incorporates advanced management features to simplify administration. The Intel Integrated Lights Out Manager (ILOM) allows remote monitoring and management, which is crucial for maintaining uptime and performing troubleshooting without physical access to the hardware.

Another significant characteristic is the design's attention to energy efficiency. Intel's architecture optimizes power consumption, and advanced cooling techniques ensure that the system operates under thermal thresholds, thus maximizing performance while managing energy usage effectively.

In summary, the Intel SR1550ALSAS and SR1550AL servers combine a powerful processor architecture, scalability, extensive storage options, comprehensive management features, and energy efficiency. These characteristics make them suitable for diverse applications, ensuring that businesses can meet their performance and reliability needs in an ever-evolving IT landscape.
Top Page Image Contents