Intermec PB3 manual Battery Safety Information

4Slide the battery towards the LEDs. The battery snaps into place.

If the battery is not charged, the Status LED for that bay turns red. The Status LED turns green when the battery is charged.

Battery Safety Information

Follow these tips for maintaining the PB3 battery:

•Be sure to fully charge the battery before long printing sessions, such as printing receipts with many bar codes and graphics.

•For maximum battery life, Intermec recommends charging the battery at 25°C (77°F).

•Remove the battery from the printer before storing the printer for long periods of time.

•The battery storage temperature is -20°C to 40°C (-4°F to 104°F). Do not store a fully charged battery at temperatures greater than 40°C (104°F) for long periods of time – the battery may permanently lose charge capacity.

•Dispose of battery according to local regulations. Do not throw in trash.

•Do not disassemble, short circuit, heat above 80°C (176°F), or incinerate. The battery may explode.

For more information, see the PB2 and PB3 Battery Instructions.

PB3 Mobile Printer User’s Guide 7