Printing a Configuration Test Page
Once the battery is charged and paper is loaded, you can print a configuration test page. Use this information for reference when installing the PB3 and to verify correct printer operation. If you cannot print the test page, see “Troubleshooting” on page 19.
Note: If you are using the AC adapter/charger as a power source, the printer will not print unless a battery is installed.
To print a test page
1Make sure the printer is off before you begin.
2Press and hold the Feed button.
3Press the Power button once to turn on the printer. When the printer starts printing the test page, release the Feed button.
4To stop or cancel printing the test page, press either the Power or Feed button.
PB3 Mobile Printer User’s Guide | 11 |
