SECTION
Removing/Installing the Deluxe Seat
WARNING
Before use, ensure that the seat is in the locked position. The seat lever MUST be pulled up to the 90° position to allow the seat to drop into the locked position. Oth- erwise, a fall from the scooter could occur causing bodily injury and/or damage to the scooter.
NOTE: For this procedure, refer to FIGURE 7.3.
Removing
1.Fold down seat back.
2.Pull up the seat lock lever to 90°.
3.Lift the seat assembly up and away from the seat post.
Installing
1.Lower the seat assembly onto the seat post.
2.Pull up the seat lock lever to 90° to allow the seat to drop into the locked position.
3.Lift up on seat assembly to ensure the seat is secure.
Seat Lock Lever in
Unlocked Position
Seat
Assembly
Seat Post
Seat Lock Lever
in Locked
NOTE: Tiller not shown for clarity.
FIGURE 7.3 - Removing/Installing the Deluxe Seat
Part No. 1125053 | 31 | 220 |
