SECTION 12—SCOOTER ACCESSORIES
Seat
Crutch Cane
Holder
Hook
Mounting Knob
Base 
Accessory Tube
FIGURE 12.1 Installing/Removing the Crutch/Cane Holder
Installing/Removing the Safety Flag
NOTE: For this procedure, refer to FIGURE 12.2.
WARNING
The installation of the safety flag onto the back of the scooter seat significantly increases the length of the scooter. When turning the scooter or swiveling the scooter seat, it is important to take note of this increased length - otherwise, injury and/or damage to the surrounding property may result.
Installing
1.Install the bracket into the accessory tube located on the back of the seat.
2.Install mounting knob to secure the bracket in place. Securely tighten.
3.Install safety flag into bracket.
Removing
1.Remove the safety flag from the bracket.
2.Remove the mounting knob that secures the bracket in place.
3.Remove the bracket from the accessory tube located on the back of the seat.
Safety | Seat |
Flag |
|
Seat
Mountin
g Knob
Accessory
Bracket
Tube
FIGURE 12.2 Installing/Removing the
Safety Flag
220 | 48 | Part No. 1125053 |
