SECTION 11—TRANSPORTING
4.Grasp the front frame assembly on either side and slide the front frame assembly onto the rear frame assembly.
NOTE: Lifting the front frame assembly slightly may help slide the front and rear frame assemblies together.
5.Flip down the frame lock pin to the horizontal, locked position.
6.Install the battery box. Refer to Refer to Removing/Installing the Battery Box on page 41.
7.Install the seat. Refer to Removing/Installing the Deluxe Seat on page 31 or Removing/ Installing/Adjusting the Padded Seat on page 29.
| Refer to Removing/Installing |
| the Deluxe Seat on page 31. |
| Frame Lock Pin |
| (in Unlocked Position) |
Refer to Removing/ | Frame Lock Pin |
Installing the Battery Box | (in Locked Position) |
on page 41. |
|
Refer to Adjusting the Tiller Angle on page 35.
Frame Post
Alignment
Pin
Rear Frame
Assembly
Front Frame
Assembly
NOTE: Scooter with Deluxe Seat option shown. Scooter with Padded
Seat option disassembles in the same way.
FIGURE 11.1 Transporting the Scooter
220 | 46 | Part No. 1125053 |
