Invacare 220 Adjusting Seat Height Deluxe Seat Only, Adjusting 90 Seat Swivel Deluxe Seat Only

SECTION 7—SEAT AND ARMS

Adjusting Seat Height - Deluxe Seat Only

NOTE: For this procedure, refer to FIGURE 7.4.

1.Remove the seat. Refer to Removing/Installing the Deluxe Seat on page 31.

2.Remove the quick-release pin that secures the seat post to the frame tube.

3.Align the frame tube mounting hole with one (1) of three (3) seat post mounting holes to achieve desired seat height.

4.Insert the quick-release pin through both the frame tube and the seat post.

NOTE: Ensure that the detent ball is visible outside the frame tube.

5.Install the seat. Refer to Removing/Installing the Deluxe Seat on page 31.

Seat Post

Quick-Release

NOTE: Tiller not shown for clarity.

Mounting Holes

Frame Tube

FIGURE 7.4 - Adjusting Seat Height - Deluxe Seat Only

Adjusting 90° Seat Swivel - Deluxe Seat Only

WARNING

Ensure that seat is locked into the forward position BEFORE and DURING operation of the scooter. Otherwise, injury to the user and/or damage to the scooter may result.

CAUTION

DO NOT use the seat swivel option when accessories are installed (such as safety flag, crutch/cane holder, etc.) and the seat is mounted in lowest height adjustment position. Otherwise, damage to the scooter may occur.

220 32 Part No. 1125053