Adjusting Cable Adjuster Unit - Wheel
Assembly - MODEL 65400 ONLY
(FIGURE 8)
Adjusting Cable Adjuster Unit - Wheel Assembly - MODEL 65420 ONLY (FIGURE 9)
NOTE: Adjusting the cable adjuster unit will increase/ decrease the cable brake pressure on the wheels.
NOTE: COUNTERCLOCKWISE/CLOCKWISE di- rections are determined by standing behind the rollator (users position).
1. | Loosen the cable brake adjuster unit locknut. | |
2. | Do one (1) of the following: | |
| A. | To increase tension, turn the cable adjuster unit |
|
| COUNTERCLOCKWISE. |
| B. | To decrease tension, turn the cable adjuster unit |
|
| CLOCKWISE. |
3. | Retighten the cable adjuster unit locknut. | |
4. | Test the brake. If the tension of the brake handle is | |
| STILL too loose/tight, perform the following: | |
| A. | Repeat STEP 1. |
NOTE: Adjusting the cable adjuster unit will increase/ decrease the cable brake pressure on the wheels.
NOTE: COUNTERCLOCKWISE/CLOCKWISE di- rections are determined by standing behind the rollator (users position).
1.Loosen the cable brake adjuster unit locknut.
2.Do one (1) of the following:
A.To increase tension, turn the cable adjuster unit
COUNTERCLOCKWISE.
B.To decrease tension, turn the cable adjuster unit
CLOCKWISE.
3.Retighten the cable adjuster unit locknut.
4.Test the brake. If the tension of the brake handle is STILL too loose/tight, repeat STEPS
B. | Loosen the phillips screw on the brake clamp. |
C. | Pullthebrakewirefurtherthroughthebrakeclamp. |
NOTE: There will be additional excess wire. It may be necessary to fold wire up to keep wire from interfering
Cable
Brake Handle
Cable Adjuster
Unit Locknut
with brake action.
Cable Adjuster Unit | Brake Cable |
Cable Adjuster
Unit Locknut
Brake
Brake
Clamp
Phillips Screw
Cable Adjuster Unit
Top of Rear Leg
FIGURE 9 - ADJUSTING CABLE ADJUSTER UNIT -
WHEEL ASSEMBLY - MODEL 65420 ONLY
FIGURE 8 - ADJUSTING CABLE ADJUSTER UNIT -
WHEEL ASSEMBLY - SPRINT ONLY
9
