7 ARMS

7 Arms

￿ WARNING

After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur.

Do not attempt to lift or tilt a wheelchair by using any removable (detachable) parts. Lifting by means of any removable (detachable) parts of a wheelchair may result in injury to the user or damage to the wheelchair.

7.1Installing the Swingaway Padded Armrest Socket

1.

Remove the back. Refer to Removing/Installing the Back Frame on page 55.

 

2.

Remove the split ring of the back release cord from the plunger pin in the back stop insert.

 

3.

Remove the plunger pin from the back stop insert.

 

4.

Perform STEPS 2-3 on remaining back stop insert.

 

 

Plunger Pin

Back Stop Insert

Split Ring

Back Release Cord

FIGURE 1 Disconnect Back Release Cord

Invacare® Crossfire™T7A Wheelchair

34

Part No 1167484

Page 34
Image 34
Invacare CT7A user manual Arms, Installing the Swingaway Padded Armrest Socket