Invacare CT7A user manual Detail a, Seat Angle Adjustment

9 SEAT

	Seat
Fastening Strips located in	Upholstery
between the back
upholstery cover and the
seat upholstery

Detail “A” Seat Upholstery

FIGURE 1 Replacing Seat Upholstery

9.2Seat Angle Adjustment

The seat angle can be changed by raising or lowering the rear of the seat frame relative to the side frame.

1.Fold the back. Refer to Unfolding/Folding the Back on page 41.

2.Flip wheelchair upside down.

3.Loosen, but DO NOT remove, the two mounting screws that secure the front of the seat frame to the side frame.

4.On the top of each crescent link, remove the locknut and washer from the mounting screw.

5.On the bottom of each crescent link, remove the locknut and washer from the mounting screw.

6.Adjust seat angle by performing one of the following:

• Moving top mounting screws to a new adjustment hole in each crescent link.

Part No 1167484 57 Invacare® Crossfire™T7A Wheelchair