11 WHEELS

4.Align the desired mounting positions of the camber tube clamps with the opening of the camber tube supports.

 

 

￿

CAUTION

Ensure one empty mounting position remains between the two socket screws, otherwise damage to the wheelchair may

 

occur.

 

 

5.Install the four socket screws and washers into the desired mounting positions of both camber tube clamps. Hand tighten.

Ensure that both camber tube clamps are adjust to the same position in the camber tube support. This will ensure that the camber tube remains at 90° to each side frame.

6.Slide the camber tube forward or backward to adjust the wheelbase length to the desired position. Securely tighten the four socket screws.

7.Install the rear wheels. Refer to Removing/Installing Rear Wheels on page 62.

Camber Tube

Support

Washers

Socket Screws

Camber Tube Clamp

Camber Tube

Camber Tube Direction

Facing Rear of Wheelchair

Camber Tube

Camber Tube

Clamps

Camber Tube

Facing Front of Wheelchair

FIGURE 10 Reversing the Camber Tube Clamp Direction

Part No 1167484

71

Invacare® Crossfire™T7A Wheelchair

Page 71
Image 71
Invacare CT7A user manual Occur, Camber Tube Direction Facing Rear of Wheelchair, Facing Front of Wheelchair