Invacare CT7A user manual Removing/Installing the Elastomers Suspension Forks Only

11 WHEELS

2.Remove the threaded bushing and mounting screw securing the suspension fork top to the elastomer and the suspension fork bottom. DO NOT use excessive force.

3.If replacing the elastomer, discard the existing elastomer.

Installing the Elastomer

 Make sure the elastomer sits in the two recessed areas on the fork.

1.Position the new elastomer between the suspension fork top and suspension fork bottom.

2.Align the mounting holes in the suspension fork top and suspension fork bottom.

3.Using the threaded bushing and mounting screw, secure the suspension fork top and suspension fork bottom. DO NOT use excessive force.

￿ WARNING

Use Loctite 242 when reinstalling the mounting screw into the threaded bushing. Otherwise the fork can become disassembled. Possible injury or damage could result.

4.Apply Loctite 242 to the mounting screw.

5.Reinstall the mounting screw into the threaded bushing and tighten securely.

	Suspension Fork Top
Locknut	Threaded Bushing
Elastomer	Mounting
	Screw
Mounting	Suspension Fork
Screw
	Bottom
	Caster

FIGURE 20 Removing/Installing the Elastomers (Suspension Forks

Only)

Part No 1167484 83 Invacare® Crossfire™T7A Wheelchair