Invacare CT7A user manual Changing Wheel Lock Handle Position, Replacing/Adjusting the Wheel Locks

10 WHEEL LOCKS

5.Repeat the above procedures until the wheel locks hold the wheelchair.

Push-to-Lock or Pull-to-Lock Wheel Locks		Under Mount Wheel Lock
Mounting Screws	3/16 inch	Mounting Screws	3/16 inch
	(1/8-inch)		(1/8-inch)

Wheel		Wheel Lock	Wheel Lock		Wheel Lock
Lock	Tire			Tire	Shoe
		Shoe

FIGURE 1 Replacing/Adjusting the Wheel Locks

10.2 Changing Wheel Lock Handle Position

1.Loosen, but DO NOT remove, the rear handle mounting screw.

2.Remove the front handle mounting screw and locknut.

3.Align the front handle mounting hole with one of three desired mounting positions on the wheel lock.

4.Using the front handle mounting screw and locknut, secure the handle to the wheel lock.

5.Securely tighten the front and rear handle mounting screws and locknuts.

6.Repeat STEPS 1-5 on remaining wheel lock handle.

Wheel lock

Handle

Mounting

Positions

Rear Handle	Front Handle
	Mounting Screw
Mounting Screw
	and Locknut
FIGURE 2 Changing Wheel Lock Handle Position

Invacare® Crossfire™T7A Wheelchair 60 Part No 1167484