FRONT RIGGINGS

SECTION 3

6.From the outside of the swingaway front rigging, insert the riv nut through both the front rigging support and the footplate assembly.

7.From the inside of the swingaway front rigging, insert the button head screw through the appropreate adjustment hole and thread into the riv nut.

8.Using a screwdriver to hold the riv nut in position, securely tighten the button head screw. Torque to 32 in-lbs.

FRONT

9.Rotate cam lock lever DOWN to LOCKED position.

10.Repeat STEPS 1-8 to adjust the remaining footrest.

 

 

Front Rigging

 

Front Rigging

Support

 

Button Head

 

Support

 

 

Screw

Button Head Screw

 

 

 

Riv Nut

Adjustment

Adjustment Hole

 

 

Hole

 

 

Cam Lock Lever

 

 

 

 

Footplate

INSIDE OF

 

Assembly

 

 

SWINGAWAY

 

 

FRONT

NOTE: Swingaway footrests shown.

RIGGING

Riv Nut

Footplate Assembly

OUTSIDE OF SWINGAWAY FRONT RIGGING

RIGGINGS

FIGURE 3 - FOOTPLATE HEIGHT ADJUSTMENT - BOLT-IN-PLACE

HEIGHT ADJUSTMENT

FIXED FRAME (FIGURE 4)

1.Remove impact guards and/or calf strap, if necessary.

2.Loosen, but do not remove the bolt and locknut that secure the lower footrest assembly to the upper footrest support.

3.Reposition the lower footrest assembly to the desired height.

4.Securely tighten the bolt and locknut.

Wheelchair

Frame

Footplate

Assembly

Bolt and

Locknut

FIGURE 4 - FOOTPLATE HEIGHT ADJUSTMENT - FIXED FRAME

5.Repeat this procedure for the other footrest, if necessary.

6.Replace impact guards and/or calf strap, if necessary.

Part No. 1110547

23

Tracer® EXI

Page 23
Image 23
Invacare Tracer EXIR manual Fixed Frame Figure, Outside of Swingaway Front Rigging