Invacare Tracer EXIR manual Detail a Footplates with BOLT-IN-PLACE, Spring Buttons Footplates

FRONT RIGGINGS SECTION 3

7.Insert the lower footrest assembly into the upper footrest assembly to desired height.

8.Perform one (1) of the following as shown in DETAIL "A" of FIGURE 6:

A.FOOTPLATES WITH SPRING BUTTONS: Ensure that the release buttons fully protrude from holes on both sides of the upper footrest support.

B.BOLT-IN-PLACE FOOTPLATES:

•From the outside of the swingaway front rigging, insert the riv nut through both the front rigging support and the footplate assembly.

•From the inside of the swingaway front rigging, insert the button head screw through the appropreate adjustment hole and thread into the riv nut.

•.Using a screwdriver to hold the riv nut in position, securely tighten the button head screw. Torque to 32 in-lbs.

9.Rotate cam lock lever DOWN to LOCKED position.

DETAIL "A"

FOOTPLATES WITH			BOLT-IN-PLACE		Front Rigging		Riv Nut
SPRING BUTTONS			FOOTPLATES
					Support
		Front Rigging		Button Head
		Support			Screw
		Release	Front Rigging
		Button
Adjustment			Support
		Footplate
Holes					Adjustment
Cam Lock Lever		Assembly	Cam Lock Lever
					Hole
						Footplate
			Footplate Assembly
						Assembly
NOTE: Swingaway footrest shown.			INSIDE OF			OUTSIDE OF
			SWINGAWAY			SWINGAWAY
			FRONT	NOTE: Swingaway			FRONT
			RIGGING	footrests shown.		RIGGING
	Mounting Screw		Cam Lock Lever

Spacer	Heel Loop
	Slide Tube

Footplate Assembly

Locknut

Footplate

FIGURE 6 - HEEL LOOP REPLACEMENT

FRONT RIGGINGS

Part No. 1110547 25 Tracer® EXI