SEAT AND BACK

SECTION 5

 

 

 

Section 5 - Seat and Back includes the following:

Replacing Back Upholstery

Replacing Seat Upholstery

Adjusting Seat Width

WARNING

After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur.

REPLACING BACK UPHOLSTERY (FIGURE 1)

1.Remove the eight (8) phillips screws and washers that secure the existing back upholstery to the back canes.

2.Remove existing back upholstery from the back canes.

3.Securely tighten the new back upholstery to the back canes with the phillips screws and washers.

Back Upholstery

Washers

Phillips

Washers

Screws

FIGURE 1 - REPLACING BACK UPHOLSTERY

REPLACING SEAT UPHOLSTERY (FIGURE 2)

1.Remove the eight (8) phillips screws and washers that secure the existing seat upholstery to the crossbraces.

2.Remove the existing seat upholstery from the crossbraces.

3.Ensure positioning of seat positioning strap (if used). Refer to INSTALLING THE SEAT POSITIONING STRAP in SECTION 10 of this manual.

4.Install new seat upholstery by reversing STEPS 1-2.

Phillips Screws

Seat Upholstery

FIGURE 2 - REPLACING SEAT UPHOLSTERY

SEAT AND BACK

Part No. 1110547

27

Tracer® EXI

Page 27
Image 27
Invacare Tracer EXIR manual Replacing Back Upholstery Figure, Replacing Seat Upholstery Figure, Seat and Back Section