Foot Pad Set Installation
Flip the KVM switch upside down. Peel the protective films off of the foot pads, then stick the pads to the four corners, as shown in the diagram below.
Rack Mounting
Step 1
Remove the screws from the left and right sides of the switch (2 screws total) near the front of the switch.
8- | USB DVI | KVM Switch |
Port |
|
1 | AUTOSCAN |
|
| 2 | |
|
|
3 | 4 |
|
5 | 6 |
|
7 |
|
K/MRESET | 8 |
|
6
