4.Plug your secondary microphone and speakers into the console audio ports located on the unit’s rear panel.
5.Using the custom USB DVI KVM cable set provided with this package, plug the DVI connector into any available DVI socket in the KVM port section of the switch, then plug the accompanying USB and audio connectors into their corresponding USB, microphone, and speaker sockets.
6.At the other end of the cable, plug the USB, video, microphone, and speaker cables into their respective ports on the computer.
4
5
Note: Verify that all the plugs |
|
are in the same KVM Port | 6 |
sockets (all in Port 1, all in | |
Port 2, etc.). |
|
7.Plug your USB peripherals into the type A sockets in the USB hub section.
8.Plug the power adapter that came with your switch into an AC power source, then plug power adapter cable into the switch’s Power Jack.
8 7
9. Turn on the power to the computers.
10
