P/N: 900-10004-00 REV 02 USER GUIDE, IOSAFE R4
106
Setup
in the Info column. It may take a couple of minutes for RAIDar to display this. At
this point, click the
Setup
button to enter the Volume Setup screen.
Select the desired mode along with the desired snapshot size and click
Create volume
now
. The ioSafe R4 will proceed with a reboot to re-configure your volume to the desired
specification. If no action is taken within 10 minutes, the system defaults to X-RAID and
begins its initialization process.
Before beginning any of these activities, make sure to back up all important data.