www.ironmanfitness.com
4
ASSEMBLY FOR UPRIGHT POST
Step 1:
Insert the upright post cover (I) to the upright post (D) from the bottom side.
Step 2:
Connect the lower pulse wire (A4) with the upper pulse wire (A33). Also, connect the lower sensor wire (A36) with the upper sensor wire (A34).
Step 3:
Attach upright post (D) to the front main frame (A1). Secure with 4 allen screws (N1), 4 spring washers (N2) and 4 flat washers (N3).
Step 4:
Slide the upright tube cover (D) down to conceal tube connection.
Note:
Be careful not to pinch the sensor wire connection during assembly.
Use Tool
6mm
A33
A4
N2 N3
N1
D
I
A34 I
A36
A1
10 AssemblyImportant Information
