SECTION 3: PREVENTATIVE MAINTENANCE

DAILY/WEEKLY/MONTHLY MAINTENANCE

Daily:

1.Drain and clean the dishmachine as per the cleaning instructions supplied with this manual. During cleaning, any items that may appear to be broken or failed should be reported to authorized service personnel.

Weekly:

1.Delime the machine. NOTE: The deliming agent that you may use may require more or less frequency in application. Because water conditions vary from installation to installation, it may be necessary to delime the machine more often or per- haps even less. Follow the deliming agent manufacturers instructions regarding frequency of application and adjust the main- tenance schedule as required.

2.Verify there are no leaks. This includes inspecting the integrity of all gaskets, including the ones inside the machine, as well as ensuring that none of the silicone used between the individual sections has frayed or been removed. Any torn gaskets should be immediately replaced. Re-apply silicone as required. The machine should be completely turned off and drained for this pro- cedure so that gaskets in the lower parts of the tub(s) can be examined.

3.Verify the operation of the Emergency Stop Switches. Simply start the unit with all personnel standing clear and push in Emergency Stop Switch to verify that they stop the machine. Do this for each switch. NOTE: The Emergency Stop Switch stops the conveyor belt and the pumps, but the heaters will remain on. If the Emergency Stop Switch fails to halt the machine, then the wiring to the switch should be verified. If, according to the schematic, the switch is wired correctly, then it is most likely faulty and should be replaced. Immediately inform operating personnel of the defect and instruct them as to where the other Emergency Stop Switch is at as well as the main stop switch on the front control panel.

4.Verify the operation of the door safety switches. Start the unit with all personnel standing clear and open each door one at a time to verify that the unit will shut off. Do this for all prewash, wash and power rinse doors. You should not have to lift the door more than 6 inches to achieve the desired result. Be very careful as hot water may spray out from the bottom of the door. NOTE: The door interlock switches stop the conveyor belt and the pumps, but the heaters remain on.

5.Verify that the prewash, wash and power rinse doors open all of the way.

6.Verify the conveyor belt tension as per the instructions given in the installation section of this manual.

7.Verify the operation of the temperature display. Operate the unit normally and ensure that the display cycles as it is supposed to, through each required parameter. If it does not cycle or it appears that it is not reading the temperature, it must be replaced.

8.Verify the operation of all green start switches and red stop switches. With the unit energized, depress the start switch as the control box and allow the unit to start. After approximately sixty seconds, press the stop switch. The unit should stop. Verify that the lights in the switches are working as well. Any problems should be investigated immediately to see of components need to be replaced. Perform this check on the switches located at the load and unload ends as well.

9.Verify drive motor stop switch, and slide stop switches.

Monthly:

1.Inspect the gear drive gears for missing or damaged teeth. If there has been any sort of damage, the gear should be replaced immediately.

2.Inspect seals used in final rinse arms to ensure they are in good condition. Any that have nicks, tears or are missing should be replaced.

3.Inspect the conveyor drive belt for damaged or missing pegs. Any that are suspect should be replaced. Loss of pegs decreas- es the number of dishes per hour that the machine will wash. Check end caps to rods and ensure that none are missing.

4.Visual inspection of electrical boxes. With power to the unit shut off at the service breaker, open the main control box and the control boxes for each section and make a visual inspection of the components. Verify that there are no loose wires, there is no carbon scoring and that all components are secure. Replace the covers and re-energize the unit if no problems are

JFT Series Technical Manual 7610-002-77-38

Issued: 03-16-2006 Revised: N/A

23

Page 29 Page 31
Page 30
Image 30
Jackson JFT-S technical manual DAILY/WEEKLY/MONTHLY Maintenance, Daily, Weekly, Monthly
Page 29 Page 31

JFT, JFT-S specifications

Jackson JFT is an advanced Java library designed for efficiently handling JSON data. Built on the popular Jackson core framework, Jackson JFT (JSON for Transformation) enhances Jackson's capabilities by providing powerful features for transforming JSON structures without losing the flexibility and performance that developers appreciate.

One of the main characteristics of Jackson JFT is its seamless integration with the Jackson ecosystem. It maintains compatibility with existing Jackson modules, allowing developers to leverage the extensive functionality of the framework. This integration ensures that users can easily transition to Jackson JFT, taking advantage of its additional features while retaining access to the wide range of tools already available in Jackson.

A key feature of Jackson JFT is its focus on JSON transformation. The library allows for easy manipulation and transformation of JSON data structures through a set of intuitive APIs. Developers can define transformations in a clean and readable manner, making the process of converting or mapping JSON data to different structures straightforward. This is particularly beneficial in scenarios where data might need to be reshaped for compatibility with different systems, APIs, or for front-end display purposes.

Jackson JFT also supports advanced data binding, allowing it to bind JSON data directly to Java objects and vice versa. This feature streamlines the process of parsing JSON data and is invaluable for applications that require frequent data interchange. The library handles various data types, ensuring that complex nested structures are managed efficiently.

Performance is another essential characteristic of Jackson JFT. The library is optimized to handle large datasets without significant overhead, making it suitable for applications with heavy data processing needs. Its efficient handling of memory and processing power results in faster transformations and reduces latency in web applications.

Furthermore, Jackson JFT ensures reliability and robustness in data handling. With built-in error handling and validation mechanisms, developers can easily identify issues in JSON data and ensure data integrity throughout the transformation process.

In summary, Jackson JFT stands out as a powerful tool within the Jackson ecosystem, designed to simplify JSON transformation and data handling. Its seamless integration, advanced data binding capabilities, performance optimizations, and reliability make it an ideal choice for developers looking to work with JSON data in Java applications. Whether it's for web services, data interchange, or application configuration, Jackson JFT provides a modern solution for effective JSON processing.
Top Page Image Contents