SECTION 4: TROUBLESHOOTING

COMMON PROBLEMS (EXPORT UNITS)

WARNING: Inspection, testing and repair of electrical equipment should be performed only by qualified service per- sonnel. Certain procedures in this section require electrical tests or measurements while power is applied to the machine. Exercise extreme caution at all times. If test points are not easily accessible, disconnect power, attach

test equipment and reapply power to test. When replacing electrical parts, disconnect power at source circuit breaker.

Problem: Dishmachine will not run, no voltage at wash relay terminals L1 and T1.

1.Service disconnect switch off or faulty. Turn disconnect on.

2.Branch circuit breaker tripped/fuse blown. Reset or replace.

3.Loose or broken connection to dishmachine. Tighten or replace connections.

Problem: Machine will not run in "ON" position unless cam timer is moved off the "home" position.

1.Door switch shorted out. With the door open, check for voltage between ORANGE/WHITE door switch and neutral. If 220V, replace the door switch.

2.Faulty control relay. With the door open, check for voltage between connections #9 & #3 on control relay. If 220V, replace control relay.

3.Faulty "cycle reset" microswitch in cam timer. Replace microswitch.

Problem: Machine will not cycle in "ON" position, works in Delime mode.

1.Faulty cycle reset cam microswitch. With the switch in the Normal position, rotate the cams manually off the home position. Check the voltage between the ORANGE and BLACK/WHITE wires on the cycle reset switch. If it is 220V, then the switch is open and should be replaced.

2.Faulty cam timer motor. If cam timer is not rotating, check the voltage to the motor. If voltage is present when the door is closed, replace the motor.

3.Faulty control relay. Check the voltage across contacts #9 and #6. If 220V when the door is closed, replace the relay.

4.Faulty NORMAL/DELIME switch. In the NORMAL position, check the voltage between WHITE/BLACK & WHITE/RED wires to switch. If 220V, replace the switch.

Problem: Machine will not run. Wash pump motor will run if wash relay is depressed manually (nothing else works).

1.Open door switch. With door closed, measure voltage between BLUE and WHITE/BLACK wires on terminals #6 & #9 of the relay. If 120V, replace the relay.

2.Faulty control relay. Measure between the BLACK wires on terminals #6 & #9 of the relay. If 220V, replace the relay. Measure between the WHITE/ BLACK wire on terminal 4 and the ORANGE/WHITE wire on terminal 7 of the relay. If 220V, replace relay.

Problem: Machine will not run in "ON" position or in Delime mode.

1.Faulty door switch. With door closed, check for voltage between WHITE/BLACK and ORANGE/WHITE wires to the door switch. If 220V, replace open switch.

2.Faulty OFF/ON/FILL switch. With switch ON, check voltage between BLACK and WHITE/BLACK wires on switch. Replace the switch if 220V.

3.Faulty NORMAL/DELIME switch. In the NORMAL position, check the voltage between WHITE/BLACK & WHITE/RED wires to switch. If 220V, replace the switch.

Problem: Machine cycles continuously.

1.Cycle reset switch loose. Reposition switch assembly, bend metal lever if necessary.

2.Faulty cycle reset switch.Measure between BLACK/YELLOW & ORANGE wires on "cycle reset" switch while timer is rotat- ing. As the switch lever drops into home position you should measure 220V. If not, adjust or replace the switch.

Problem: Machine fills continuously even with no power applied to machine.

1. Solenoid valve dirty or faulty. Clean valve, replace plunger and/or diaphragm.

Conserver XL Series Technical Manual 7610-002-10-23

Issued: 11-28-2007 Revised: N/A

32

Page 38 Page 40
Page 39
Image 39
Jackson AXL2-CML, AXL2-CMR technical manual Common Problems Export Units, Problem Machine cycles continuously
Page 38 Page 40

XL2-CML, XL2-CMR, AXL2-CMR, AXL2-CML, AXL2 specifications

The Jackson XL2, AXL, AXL2, AXL2-CML, and AXL2-CMR represent a remarkable lineage of advanced electric guitars designed for superior playability, tonal versatility, and innovative technology. These instruments cater to musicians of all levels, from aspiring guitarists to seasoned professionals, offering a blend of classic styling and modern features.

The Jackson XL2 model is characterized by its sleek body design and a set-neck construction that enhances sustain and allows for effortless access to higher frets. The guitar comes equipped with high-output pickups that deliver powerful tones, making it ideal for rock and metal genres. Its distinctive headstock design not only adds to its aesthetic appeal but also aids in tuning stability.

Moving to the AXL series, these guitars incorporate a double-cutaway body shape that provides excellent comfort while playing. The AXL models are known for their versatility, sporting a range of pickup configurations that allow for a wide spectrum of sounds. Players can expect a balance between aggressive tones and smooth, melodic qualities, making it suitable for various playing styles.

The AXL2 builds upon its predecessor’s capabilities, featuring an improved ergonomic design that enhances comfort during long playing sessions. The inclusion of enhanced electronics provides greater tonal options, and the instrument's lightweight construction ensures ease of handling. The AXL2-CML variant introduces a sleek matte finish, appealing to modern aesthetics while retaining robust playability.

For those seeking even more specialized features, the AXL2-CMR variant is designed with custom routing options and unique pickup placements that cater to the needs of advanced players. This version offers superior tonal clarity and response, making it perfect for intricate playing styles and complex musical compositions.

All these models showcase an attention to detail in craftsmanship, employing premium materials that ensure durability and longevity. With innovations such as locking tuners, push-pull coil-splitting features, and more, the Jackson XL2, AXL, AXL2, AXL2-CML, and AXL2-CMR cater to musicians looking for reliability and performance on stage or in the studio. Whether you are looking for raw power, tonal versatility, or refined aesthetics, these guitars meet a broad range of musical needs, making them indispensable for any guitarist.
Top Page Image Contents