Jacuzzi J-ALLURELuxury Bathing and Entertainment System manual Fixed Panels Installation

J-Allure

Fixed Panels Installation

Locate the guide with the gasket. This is the lower guide. Remove this gasket and install on the top guide. Position the lower guide on the two fixed panels while they are resting on the floor in an upside down position. Align the predrilled holes in the guide and panels and screw together with screws and spacers (3.5x45mm self-threading). Attach the external extrusion of the panels to the guide with 4.2x19mm self-threading screws. The right and left hand fixed panels are identified by the logo.

Invert the assembled components and install the upper guide following the same procedure as used with the lower guide. Caulk the top of each fixed panel.

SCREWS WITH SPACERS (4)

UPPER GUIDE

SEALANT

LOGO

SCREWS (8) (4.2x19mm)

SEALANT

SEALANT

LOWER

GUIDE

REMOVE

GASKET

14