J-Allure
Side Walls Caulking
After the side walls are installed, they must be caulked with silicone sealant (not provided). Seal the entire length at the bottom and from the bottom to top where the side wall moulding meets the attached extrusion. Also caulk the joint between the side wall extrusion and the fixed panel frame.
Apply the two foam tapes (provided) to side wall. The first tape will butt up against the curve of the side wall with the second tape against the first tape. Remove the facing paper from both. Install the V seal as shown so that it covers the joint between the foam tapes.
TWO STRIPS OF FOAM TAPE SIDE BY SIDE FROM TOP TO BOTTOM (ONLY ON RIGHT SIDE WALL)
WALL
EXTRUSION
V SEAL
FIXED
PANEL
FRAME
SIDE
WALL
SEALANT
SIDE WALL
SEALANT
ALONG ENTIRE
LENGTH OF
SIDE WALL
BATH RIM
SIDE
WALL
SEALANT
(GLASS PANELS AND GUIDES NOT SHOWN FOR CLARITY)
17
