Jacuzzi J-ALLURELuxury Bathing and Entertainment System manual Side Walls Installation

J-Allure

Side Walls Installation

Lift one of the side walls through the open doors. Reach under the bath rim and pull up the speaker wires. Hook up these wires observing the polarity as directed from the CD player manual. Then insert the 3 bolts into the slotted holes in the center panel frame. Place the opposite side of the side wall against the wall. Make sure the side wall matches the fixed panel. Set the side wall down onto the side of the bath so that the lower frame of the wall is inserted between the bath and the wall. Secure the side wall to the center panel frame with lock washers and M6 nuts. With the wall flush against the fixed panel, drill three 7/64" holes using holes in the wall frame as guides. (Be careful not to scratch the finish.) Secure the wall using 3.5x9.5mm self-threading screws. Repeat the same procedure for the other side wall. Close door and secure.

CENTER

PANEL

FRAME

REAR OF	SIDE
SPEAKER	WALL

- +

OBSERVE POLARITY

(SEE BLAUPUNKT MANUAL)

WALL

EXTRUSION

FIXED

PANEL

FRAME

SIDE

WALL

SIDE WALL

FRAME

BATH RIM

16