Janome 4800 manual Various Utility Stitches, Basting

1 3

4

2

[1]

Various Utility Stitches

•Basting

1	Stitch pattern :	24
2	Presser foot:	Basting foot P

3Thread tension dial : 1 to 4

4 Feed dogs : Down

* Set the manual thread tension at “1 to 4”.

Attaching the basting foot:

[1] Raise the needle.

1

[2]

2

3 [3]

2

4

[1] [2] [3] [4]

[2] Remove the foot holder by loosening the thumb
screw.
[3] Attach the basting foot on the presser bar putting the
pin on the needle clamp.
Tighten the thumb screw firmly with a large
screwdriver.
1	Foot holder
2	Thumb screw
3	Pin
4	Needle clamp

How to sew

[1]Put some fabric under the foot and press the Up/ down needle button twice to bring the needle thread down through the hole in the foot. Pull the fabric and thread to the rear. Lower the presser foot.

[2]While pressing down the foot control, hold the fabric taut.

[3]When the machine is stopped after one stitch sewing, pull the fabric with the thread to the back.

[4]Repeat steps 2 and 3 to sew. After finishing sewing, pull the threads and fabric to the back and cut the threads.

*After sewing, reset the thread tension dial at “AUTO “ and raise the feed dogs, slide the drop feed lever to theleft.

26