Janome 4800 manual Mode selection key, Twin needle key, Editing key, Stitch width selection key

Direct Mode A Mode B Mode C Mode

4

5 A

6

•Mode selection key

By pressing the key, LED light will move step by step to select the stitch mode, as shown.

Direct Mode: Direct mode pattern selection

A Mode:	Pattern selection using number keys utility
	and decorative stitches)
B Mode:	Character selection using number keys
	(block type)
C Mode:	Character selection using number keys
	(script type)

•Twin needle key

Just press this button and “A” mark will appear on the display screen.

Press button again for single needle sewing.

•Editing key

This button can be used for adding, deleting and chang- ing combinations and monograms before sewing while programming stitch patterns or monograms.

For editing, use the stitch width “+” or “-” key to select editing position (see page 61, 62).

[Manual setting function of the zigzag width and stitch length for programmed patterns]

The individual programmed zigzag pattern width or stitch length can be changed (see page 63).

• Stitch width selection key

Press “+” or “-” to change the stitch width.

7

• Stitch length selection key

Press “+” or “-” to change the stitch length.

8

8