![](/images/new-backgrounds/1041937/41937129x1.webp)
[1]
2
[2]
4
[3]
[4] 6
[5]
1
3
5
4
5
7
8
SECTION V CARE OF YOUR MACHINE
Care of Your Machine
1 | Screw driver | 2 | Set screw |
3 | Needle plate | 4 | Bobbin holder |
5 | Lint brush | 6 | Feed dogs |
7 | Hook race | 8 | Soft, dry cloth |
Press the needle Up/down button to raise the needle and unplug the machine before cleaning.
Do not dismantle the machine other than explained on this page.
Do not store the machine in a
Clean the outside of the machine with a soft cloth and neutral soap.
Cleaning the Hook Race and Feed Dogs
[1]Remove the presser foot and needle. Remove the screw on the left side of the needle plate with the screwdriver supplied with the machine.
[2]Remove the needle plate and take out the bobbin. Lift up the bobbin holder and remove it.
[3]Brush out dust and lint inside the bobbin holder.
[4]Clean the feed dogs and the hook race with the lint brush.
[5]Clean the inside of the bobbin holder with a dry cloth or a lint brush.
*Wipe out gently with soft, dry cloth. You may also use a vacuum cleaner.
[1]
4
1
[3]
5
[2]2
3
6
Replacing the Bobbin Holder
1Bobbin holder
2Stopper
3Knob
4Needle plate guide pins
5Screwdriver
6Guide holes
[1]Insert the bobbin holder so that the knob fits next to the stopper in the hook race.
[2]Insert the bobbin.
[3]Replace the needle plate, inserting the two needle plate guide pins into the holes in the needle plate. Replace the screw.
64