![](/images/new-backgrounds/1041937/4193771x1.webp)
1 | , |
[1]
[2]
R
4
3
[3]
5
2
1
2
•Sewing preparation
1 | Stitch pattern: | 08 |
2 | Presser foot: | Automatic buttonhole foot R |
*When you select the buttonhole stitch, the screen indicates the message: “PULL DOWN BH (Button hole) LEVER” for a few seconds.
[1]Attach the automatic buttonhole foot R.
Make sure the groove on the holder catches the pin on the foot, when lowering the presser foot.
1Groove
2Pin
[2]Pull the button holder to the back, and place the button in it.
Push it together tightly on the button. 3 Button holder
If the button is extremely thick, make a test button- hole.
If it is difficult to fit the button through the test buttonhole, lengthen the size by pulling the button holder on the back to increase length.
4Gap
[3]Pull the buttonhole lever down as far as it will go. 5 Buttonhole lever
35