Reference - Performing An RMC Calibration
Following are
1.Make sure all LSR4300 monitors are positioned as intended.
2.Using the mic clip, attach the provided calibration microphone to a mic stand and place the mic at the mix position, oriented vertically, at ear level. Be sure that it is no closer than 1.5 feet (.46 meters) from the nearest speaker.
Position the calibration microphone vertically
3.Connect the microphone to the Left speaker’s rear panel RMC MIC input.
To perform RMC, the calibration microphone must be connected to the speaker designated as “Left” (LEFT DIP switch up).
4.Press and hold the RMC button on any speaker for at least 3 seconds (until the RMC light on the front panel of all speakers begins blinking), then walk to a spot in the room where you are not blocking the path between the microphone and any speaker.
26
