![](/images/new-backgrounds/1181823/18182367x1.webp)
Reference - Restoring Factory Settings/
LSR4300 Control Center Software
Restoring Factory Settings
Setting all DIP Switches to the ON position and
To clear the memory of a speaker and recall the factory EQ presets:
1.Turn the speaker off and disconnect its power cable.
2.Set all eight DIP switches to the ON position.
3.
4.Reset all DIP switches to the desired positions for network operation.
5.Perform this procedure for each speaker that requires it.
Settings created using LSR4300 Control Center Software such as individual speaker level trim, custom eq presets can not be viewed with out the software. If you are unsure of the settings in the speaker, the speaker can be returned to factory settings using the Reset function.
User settings such as RMC and EQ remain stored in each speaker, even when powered down. For that reason, if you are using an LSR4300 system that you did not personally set, it’s a good idea to restore factory settings before using it.
LSR4300 Control Center Software
The supplied LSR4300 Control Center Software allows you to control all system functions using a Windows or Macintosh computer. In addition, the software allows you to view multiple speaker parameters at once in an
•System MUTE and independent speaker MUTE controls.
•Independent fine speaker Level Trim controls in 0.25 dB increments.
•The RMC filter and level trim settings of each speaker can be viewed.
•LF and HF frequency centers of the system EQ can be adjusted.
•Custom EQ presets can be created and stored as well as uploaded to all speakers on a connected LSR4300 network.
•Complete system configurations can be saved to and loaded from your computer.
LSR4300 Control Center Software documentation is provided on disk and is also available for download (along with the latest version of the software itself) at www.jblpro.com.
30