OPERATING TIPS
Before You Start
•Don’t prerinse. Simply scrape off any bones or large food particles.
•If connected to a food waste disposer, make certain the disposer is empty before starting the dishwasher.
•Scrape off
•Remove certain foods such as mustard, mayonnaise, lemon juice, vinegar, salt or dressings from stainless steel flatware as soon as possible. These foods may cause rusting and pitting if allowed to remain in contact with the surface for an extended period of time.
Operating the Dishwasher
(Models with front or combination front and top touchpad controls)
1.After loading the dishwasher and adding detergent, select the desired cycle and options by pressing the pads. The indicator lights for the selected cycle and options will illuminate. To cancel an option press the pad again.
2.To start a cycle, close the door until it latches then press the START/Cancel pad once. After a pause, the fill will begin. The display countdown (select models) will flash until START/Cancel is pressed.
Note
•If START/Cancel is not pressed within 30 seconds of choosing your cycle, the dishwasher will turn off.
•To prevent unplanned cycle or option changes, these selections are “locked in” after 1 minute.
The dishwasher remembers your last cycle so you do not have to reset the cycle each time. To start the dishwasher using the same cycle and options selected on the previous wash, just press the START/Cancel pad.
3.To cancel a running cycle, press the START/ Cancel pad once. The dishwasher will drain, then shut off. To turn the dishwasher off without draining, press the START/Cancel pad twice.
Operating the Dishwasher
(Models with top only touchpad controls)
1.After loading the dishwasher and adding detergent, select the desired cycle and options by pressing the pads. The indicator lights for the selected cycle and options will illuminate. To cancel an option press the pad again.
2.To start a cycle, press the START/Cancel pad once. The indicator light will illuminate. Close the door until it latches. After a pause, the fill will begin.
Note
•If START/Cancel is not pressed within 30 seconds of choosing your cycle, the dishwasher will turn off.
•To prevent unplanned cycle or option changes, these selections are “locked in” after 1 minute.
The dishwasher remembers your last cycle so you do not have to reset the cycle each time. To start the dishwasher using the same cycle and options selected on the previous wash, just press the START/Cancel pad.
3.To cancel a running cycle, carefully unlatch the door without opening completely and wait for water circulation to stop. Press the START/ Cancel pad once and then shut the door. The dishwasher will drain, then shut off. To turn the dishwasher off without draining, press the START/Cancel pad twice and then shut the door.
Note
•If a cycle pad is pressed after the controls have been “locked in”, the light above the current cycle will flash three times.
Cont.
Note
• If a cycle pad is pressed after the controls have been “locked in”, the light above the current cycle will flash three times.
2
