Jenn-Air JDB-5 warranty Place Setting Load, Upper Rack, Rack Loading Select Models

2-RACKLOADING (SELECT MODELS)

10 Place Setting Load

Upper Rack

3 saucers are

loaded on the rack under the Stack-Rack™

Lower Rack

Shelf

(select

models)

Upper Rack

Glasses, cups, stemware, light-weight plastics, plates, bowls, pans, long-handled utensils etc. can be loaded in this rack. Do not load glasses over the tines.

The Stack-Rack (select models) on the right side of the upper rack

folds up or down for loading flexibility. Fold it down to hold long-

handled knives, spatulas and spoons or short items like cups or juice glasses. Fold it up for taller items like glasses, bowls, plates, etc.

The edge of the Stack- Rack (select models) is designed to hold stemware in place. Taller stemware will fit better on the right side as the upper rack is deeper on this side.

The Folding Tines (select models) located in the front right corner provide convenient loading space for large, bulky items like pots and pans or mixing bowls.

To lower tines, carefully push the tines out of each holder toward the center of the rack and lay the tines down.

The Cup Clips (select models) located in the center of the upper rack can be used to hold light- weight plastic items, cooking utensils, knives, etc. in place. Clip the item between the tine and the clip.

The Vari-Lock™Snugger

(select models) on the left secures lightweight items in place. It can be adjusted by grasping the wavy wire and rotating it left to snug items against the outer rack or to the right to rest on top of light items. Do not load items on top of the wire.

For best results with tall glasses, rest the bottom of the glass against the wavy wire of the Vari-Lock™Snugger (select models).

Cont.

4