TEMPERATURE CONTROLS
Touch Temperature Controls
The controls are located at the top front of the refrigerator compartment.
Control
Initial Control Settings
After plugging the refrigerator in, set the controls.
• Pressing the | or | pads adjusts the controls to |
the desired setting. |
|
•The temperature control range for both compartments is 1 through 7 (coldest).
•Initially set the refrigerator control on 4.
•Initially set the freezer control on 4.
•Let the refrigerator run at least 8 to 12 hours before adding food.
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be warm to the touch. This is a normal occurrence that helps prevent moisture from condensing on the cabinet. This condition will be more noticeable when you first start the refrigerator, during hot weather and after excessive or lengthy door openings.
Adjusting the Controls
•24 hours after adding food, you may decide that one or both compartments should be colder or warmer. If so, adjust the control(s) as indicated in the Temperature Control Guide table below. See page 20 for instructions on checking compartment temperature.
•Except when starting the refrigerator, do not change either control more than one number at a time.
•Allow 24 hours for temperatures to stabilize.
•Changing either control will have some effect on the temperature of the other compartment.
Temperature Control Guide |
|
| |
Refrigerator too warm | Set the refrigerator control | ||
| to next higher number by | ||
| pressing the | pad. | |
|
| ||
Refrigerator too cold | Set the refrigerator control | ||
| to next lower number by | ||
| pressing the | pad. | |
|
| ||
Freezer too warm | Set the freezer control to | ||
| next higher number by | ||
| pressing the | pad. | |
|
| ||
Freezer too cold | Set the freezer control to | ||
| next lower number by | ||
| pressing the | pad. | |
|
| ||
Turn refrigerator OFF | Press the refrigerator or | ||
| freezer | pad until a dash | |
| |||
|
|
|
|
10