Jenn-Air JMC8100ADB manual Custom Programs

CUSTOM PROGRAMS

For food or recipes prepared most often, you can easily customize a program using your own sequences or cooking stages (power levels/ cooking times). You can set 3 different custom programs (No, 1, No. 2 and No. 3).Each program may have 1 - 3 cooking stages.

For example, you frequently cook 1 cup long-grain rice. For Stage 1 you use 100% power for 5 minutes to bring water to a boil. You then add rice, salt and butter and for Stage 2 you use 30% power for 20 minutes to cook rice. To set these 2 cooking sequences in the first Custom Program (No,l):

Stage 1 for 5 minutes at P100 (100% power) Stage 2 for 20 minutes at P30 (30% power)

Step	Procedure	Keypad
1	Press Custom Programs once.	"_..u_sto_,
	No.1 appears in the display.	Progooooooo_s,
2	Press Cook Time.	_ook	_
		_mej
3	Press,oand0toenterminutes.	, =s0--., -
4	Press Cook Time.	"_oo_
5	2	0 ' '0	,	:'_0-
	Press 2, O,0 and 0 to enter 20 minutes	-

Press Power Level repeatedly until P30

6 appears in display.

Press Custom Programs once.

7The Custom Program No.1 is now programmed into the microwave memory.

To use a Custom Program:

StepProcedure

Once programming is completed, you

can call up any of your Custom

_o_rer"

;,._l_evelj."

,_usto_"

'programs

Keypad

1	Programs (No. 1, No, 2 or No. 3) by	pProgr_s J
	pressing the Custom Programs keypad
	once, twice or 3 times.
2	Press START.	Start'_

To delete a Custom Program:

Step

1

2

	Procedure	Keypad
Call up the Custom Program (No. 1, No,		_,_--- _
2 or No.	3) you want to delete by	," Custom
pressing	Custom Programs.	pmmgrams
Press Cook Time.		, ._ok -_

3 Press 0 and then Custom Programs.	:i--0 -"	_--Cust°m_'
	. __	progr_s

Note: • For custom programming, only Timed Cooking can be used.

•For more details, see page 14 for multi-stage cooking.

22